Prof. J. Walter - Informationstechnik, Mikrocomputertechnik, Digitale Medien Operating Manual
Hochschule Karlsruhe Logo Energy Efficient Microcontroller & MMT Project
Volcopter: Rope Control &
Winter Semester 2021
Ritu Ahmed (79250)
Pierrick Petit (79874)

4.10 Operating Manual

The drone is operated as usual with the remote control.
Connect the cable to the STARTRC battery adapter through the yellow XT60 connector. Then, connect the cable to the rotating part of the slip ring with the blue EC3 connector, and then the fixed part of the slip ring to a battery with another EC3 connector. The drone should activate, proof that the power supply is successfull. To start the drone, plug in the DJI smart battery, then press the central button, a short press followed by a long one. The remote control has to be connected in order to receive the signal sent by the drone.
During the flight, it is necessary to pay attention to the charge levels of the batteries on the ground, and the one on the drone.

  With Support of Prof. J. Walter Winter Semester 2021